6A2-16 ENGINE MECHANICAL (H25 ENGINE)
Type 1
Type 2
4) Install exhaust No.1 pipe and stiffener.
1. Exhaust No.1 pipe
2. Catalytic converter
3. Stiffener
1. Exhaust manifold
2. Exhaust No.1 pipe
5) Reverse removal procedure to install front propeller shaft if re-
1. Match mark
Tighten exhaust No.1 pipe bolts and nuts to specified torque.
Tightening Torque
.
(b): 50 N
m (5.0 kg-m, 36.5 lb-ft)
Tightening Torque
.
(b): 50 N
m (5.0 kg-m, 36.5 lb-ft)
moved.
When installing propeller shaft, align match mark.
Use following specification to torque universal joint flange.
Tightening Torque
.
(c): 55 N
m (5.5 kg-m, 40.0 lb-ft)