Float Level - Honda 1998 VT750C Service Manual

FUELSVSTEM
FLOAT LEVEL
NOTE:
• Check the float level after checking the float valve
and float.
• Set the float level gauge so that it is perpendicular
to the float chamber face and in line with the main
jet.
Set the carburetor so that the valve just contact the
float arm lip. Be sure that the float valve tip is
securely in contact with the valve seat.
Make sure the float level with the float level gauge.
TOOL:
Carburetorfloat level gauge: 07401-0010000
FLOAT LEVEL: 7.0 mm (0.28 in)
If the level is out of specification, replace the float.
Install the new a-ring into the float chamber groove.
Install the float chamber.
Install and tighten the screw securely.
5-16
CHAMBER