Wheel Bearing Removal - Honda 1998 VT750C Service Manual

REAR WHEEL/BRAKE/SUSPENSION
Remove the driven flange bearing and collar.
WHEEL BEARING REMOVAL
Install the bearing remover head into the bearing.
From the opposite side install the bearing remover
shaft and drive the bearing out of the wheel hub.
Remove the distance collar and drive out the other
bearing.
TOOLS:
Bearing remover shaft 07746-0050100
Bearing remover head, 17 mm 07746-0050500
ASSEMBLY
COLLAR
BEARING
Ii
BEARING
14-6
DISTANCE COLLAR
COLLAR
DRIVEN SPROCKET
88 Nom (9.0 kgfom,
65 Ibfoft)
IS'
~
DUST SEAL
7'
BEARING