Starter Clutch Inspection; Needle Bearing; One-Way Clutch; Clutch Housing - Honda 1998 VT750C Service Manual

)
Remove the clutch housing and one-way clutch from
the flywheel.
STARTER CLUTCH INSPECTION
NEEDLE BEARING
Check the needle bearing clutch sprag for abnormal
wear, damage.
ONE-WAY CLUTCH
Check the one-way clutch sprag for abnormal wear,
damage or irregular movement.
NOTE:
• Do not remove the one-way clutch from the
clutch housing, unless it is necessary to replace
with a new one.
• If removed the spring from the one-way clutch
groove, replace the one-way clutch assembly
(clutch and spring) with a new one.
CLUTCH HOUSING
Check the clutch inner contact surface of the housing
for damage.
STARTER DRIVEN GEAR
Check the roller contact surface for damage.
Measure the driven gear 0.0.
SERVICE LIMIT: 57.73 mm (2.273 in)
Measure the driven gear 1.0.
SERVICE LIMIT: 40.10 mm (1.579 in)
ALTERNATOR/STARTER CLUTCH
NEEDLE BEARING
[Lil
SPRAG
ONE-WAY CLUTCH
9-5