Steering Bearing Replacement - Honda 1998 VT750C Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Remove the steering stem from the steering head.
Check the steering bearings, inner and outer races
for wear or damage.
STEERING BEARING REPLACEMENT
Always replace the
Remove the lower bearing outer race using the fol-
bearings and races
lowing tool and suitable shaft.
as a set.
Remove the upper bearing outer race using the
following tools.
TOOL:
Bearing race remover
TOOLS:
Ball race remover
- Attachment
- Driver handle
07946-3710500
07953-MJ 10000
07953-MJ10100
07953-MJ10200
_ OUTER RACE
Install the stem nut onto the stem to prevent the
threads from being damaged when removing the
lower bearing inner race from the stem.
Remove the lower bearing inner race with a chisel
or equivalent tool being careful not to damage the
stem.
Remove the dust seal.
13-38
/
STEM NUT
INNER RACE/DUST SEAL
STEERING STEM