Cam Lobe Height; Camshaft Journal; Camshaft Oil Clearance - Honda 1998 VT750C Service Manual

CYLINDER HEAD/VALVES
CAM LOBE HEIGHT
Inspectthe cam lobe surfaces for scoring or evidence
of insufficient lubrication.
Measure the height of each cam lobe using a microm-
eter.
SERVICE LIMITS: IN: 38.10
mm
(1.500
in)
EX: 38.20 mm (1.504 in)
NOTE:
Inspect the rocker arm if the cam lobe is worn or
damaged.
CAMSHAFT JOURNAL
Inspect the camshaft journal surfaces for scoring or
evidence of insufficient lubrication.
Measure the 0.0. of each camshaft journal.
SERVICE LIMIT: 21.90
mm
(0.862 in)
NOTE:
Inspect the oil passages and camshaft holder for
wear or damage if the journal surface is worn or
damaged.
CAMSHAFT OIL CLEARANCE
Clean off any oil from the journals of the camshaft
holders, head and camshafts.
Put the camshaft onto the cylinder head and lay a
strip of plastigauge lengthwise on the top of each
camshaft journal.
NOTE:
• Do not block any oil holes with the plastigauge.
• Do not rotate the camshaft during inspection.
10-12
JOURNALS
CAMSHAFT
\