Wheel Bearing; Wheel Rim - Honda 1998 VT750C Service Manual

FRONT WHEEL/SUSPENSION/STEERING
WHEEL BEARING
Turn the inner race of each bearings with your finger.
The bearings should turn smoothly and quietly. Also
check that the bearing outer race fits tightly in the
hub.
Replace the wheel
Remove and discard the bearings if the races do not
bearings in pairs.
turn smoothly and quietiy, if they fit loosely in the
hub.
WHEEL BEARING
WHEEL RIM
Check the rim runout by placing the wheel in a truing
stand.
Spin the wheel slowly and read the runout using a
dial indicator.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMITS:
Radial: 2,0 mm (0.08 in)
Axial: 2.0 mm (0.08 in)
Check the spokes for loose or damage.
DISASSEMBLV
Remove the right dust seal from the right side of
the front wheel.
Remove the left dust seal from the left side of the
front wheel.
13-1~