Steering Cover - Honda 1998 VT750C Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
Install the rear seat by inserting the hook of the seat
over the front seat mounting bolt and push the seat
backward.
Align the bolt holes and tighten the bolt to the speci-
fied torque.
TORQUE: 9 N·m (0.9 kgf·m, 6.5 Ibf·ft)
STEERING COVER
BOLT
STEERING COVERS
)
REMOVAL/INSTALLATION
CAUTION:
Be careful not to break the steering cover tabs.
Remove the fuel tank (page 2-4).
Remove the trim clips.
Remove the right and left covers as assembly.
Remove the joint clip and separate the covers.
Installation is in the reverse order of removal.
NOTE:
Check that the wire harness do not interfere with
handlebar rotation.
JOINT
CLIP
"'O;:'H,...,\,--------'
TRIM
CLIPS
2-3