Brake Shoe/Pad Wear; Brake System; Front Brake Pads; Rear Brake Pads - Honda 1998 VT750C Service Manual

BRAKE SHOE/PAD WEAR
FRONT BRAKE PADS
Check the brake pad for wear.
Replace the brake pads if either pad is worn to the
bottom of wear limit groove.
Refer to page 15-5 for brake pad replacement.
CAUTION:
Always replace the brake pads as
a
set to assure
even disc pressure.
MAINTENANCE
GROOVE
REAR BRAKE SHOE
Replace the brake shoes if the arrow on the brake
arm aligns with the reference mark" b. " on full
application of the rear brake pedal.
Refor to page 14-12 for brake Shoe replacement.
BRAKE SYSTEM
INSPECTION
Firmly apply the brake lever and check the that no
air has entered the system. If the lever feels soft or
spongy when operated, bleed air from the system.
Inspect the brake hoses and fittings for deterioration,
cracks and signs of leakage. Tighten any loose
fittings.
Replace hoses and fittings as required.
Refer to page 15-3 for brake bleeding procedures.
3-23