Brake Pad/Disc; Brake Pad Replacement - Honda 1998 VT750C Service Manual

Install the diaphragm, set plate and reservoir cover.
Tighten the screws to the specified torque.
TORQUE: 2 Nom (0.2 kgfom, 1.4 Ibfoft)
COVER
SET PLATE
~
HYDRAULIC BRAKE
BRAKE PAD/DISC
~L..-......-
_
Always replace the
brake pads in pairs
to ensure even disc
pressure.
A contaminated brake disc or pad reduces stopping
power. Discard contaminated pads and clean
contaminated disc with
a
high quality brake
degreasing agent.
BRAKE PAD REPLACEMENT
Push the caliper pistons all the way in by pushing
the caliper body inward to allow installation of new
brake pads.
NOTE:
Check the brake fluid level in the brake master
cylinder reservoir as this operation causes the level
to rise.
Remove the pad pin plug and loosen the pad pin.
Remove the pad pin and the brake pads.
Install new pads so that their ends rest on the pad
retainer on the bracket properly.
BRAKE CALIPER
15-5