Fork Tube Bushing - Honda 1998 VT750C Service Manual

FRONT WHEEL/SUSPENSION/STEERING
FORK TUBE BUSHING
Visually inspect the slider and fork tube bushings.
Replace the bushings if there is excessive scoring
or scratching, or if the teflon is worn so that the
copper surface appears on more 3/4 of the entire
surface.
Check the back-up ring; replace it if there is any dis-
tortion at the point shown.
BUSHING
BACK-UP RING
CHECK POINTS
ASSEMBLY
Before assembly, wash all parts with a high flash
point or non-flammable solvent and wipe them off
completely.
COPPER SURFACES
SPACER
)
OIL LOCK PIECE
~
S
SEALlNG~
WASHER
~
~
FORK SOCKET BOLT
13-28
PISTON RING
REBOUND
SPRING
FORK TUBE
FORK CAP
,
~
~
SO-RING
SPRING SEAT
FORK PISTON
~
FORK SPRING