'98-2000:
CONNECTING ROD/CRANKSHAFT
SELECTION
Connecting rod and crankshaft are select fitted.
Record the connecting rod weight code (A, 8 or C).
Record the crankshaft weight code (L, R or No code).
If the connecting rod and/or crankshaft are replaced,
select them with the following fitting table.
NOTE:
The"
0 "
mark in the table indicates that mating is
possible in the crossed codes.
I\ront connecting rod
weight code
A
B
C
Rear connecting rod\
weight code
A
*
0
0
B
0
0
0
C
0
0
**
CAUTION:
For selecting crankshah weight.
• Select "L" crankshah weight, if the front rod and
rear rod have code A
(*).
• Select
"R"
crankshah weight, if the front rod and
rear rod have code C
(**).
• Select crankshah weight with
no
code, other than
the above two cases.
CRANKSHAFT/CRANKCASE
SELECTION
Crankcase and crankshaft are select fitted.
Record the main journal 0.0. code number (1 or 2).
Record the main journal bearing 1.0. code (A or B).
If the crankcase and/or crankshaft are replaced, select
them with the following fitting table.
CRANKSHAFT/TRANSMISSION
7
CONNECTING ROD WEIGHT CODE
12-9