Configuring Voip Connections - Gigaset N510 IP PRO Manual

Configuring the system settings

Configuring VoIP connections

You can configure up to six VoIP connections on your telephone, i.e., you can assign up to
six VoIP phone numbers to your phone.
You need to set up an IP account (VoIP account) with a VoIP provider for each connection.
You must save the access data for this IP account on your phone. The IP wizard will help
you to do this.
Launching the IP wizard:
¢
v Ï Settings
You will see the following in the display:
IP Assistant
?
Start IP
installation
assistant?
No
The procedure for the IP wizard is described on
Each time you run the IP wizard you can configure/reconfigure one VoIP connection (IP
account).
¤
Restart the IP wizard if you wish to configure/reconfigure another VoIP connection.
Please note
You can also use the Web configurator to configure and manage VoIP connections
£
( page 99).
Automatic update for the VoIP provider settings
After the first download of the VoIP provider settings, your phone will check daily whether
a newer version of the file for your VoIP provider is available from the Internet on the con-
figuration server.
Auto configuration has been used to download VoIP settings (
If there is new configuration data, this is automatically downloaded to your phone (with-
out notification).
Manual VoIP configuration with the VoIP wizard
If there is new provider data, the idle display on the handset displays the message New
profile available..
§Yes§
Press the display key to confirm the prompt.
~
Enter the system PIN if necessary and press
80
¢ ¢
Telephony VoIP Assistant
Yes
page 18.
§OK§
.
£
page 17)