Understanding The Structure Of The Web Configurator Pages - Gigaset N510 IP PRO Manual

Configuring the phone via the Web configurator
Please note
u
If the system PIN is still set as 0000 on the phone (default setting), you will be noti-
fied during login that the device is not secure and you should change the PIN. You
can deactivate this security advice for subsequent logins by selecting the option
"Don't show this security advice again.". Click OK to close the dialog box.
u
If you do not make any entries for a lengthy period (approx. 10 minutes), you are
automatically logged off. The next time you try to make an entry or open a Web
page, the Login Web page is displayed. Re-enter the system PIN to log back in
again.
u
Any entries that you did not save on the phone before automatic logoff will be lost.
Logging off
In the menu bar (
you will see the Log Off command. Click Log Off to log off from the Web configurator.
Warning
Always use the Log Off command to end the connection to the Web configurator. If,
for example, you close the Web browser without logging off beforehand, access to the
Web configurator may be blocked for a few minutes.

Understanding the structure of the Web configurator pages

The Web configurator pages (Web pages) contain the UI elements shown in (example).
Example of the structure of a Web configurator page:
Navigation area
90
£
page 91) at the top right of every Web page in the Web configurator,
Working area Buttons Menu bar
(tabs)
Help