Eco Dect - Gigaset N510 IP PRO Manual

ECO DECT

You are helping to protect the environment with your Gigaset.
Reducing energy consumption
Your telephone has a power-saving adapter plug and uses less power.
Reducing radiation
The radiation from your telephone is reduced automatically: the closer the handset is to
the base, the lower the radiation.
You can reduce the radiation from the handset and the base even more by using Eco
Mode:
Eco Mode
Reduces the radiation of the base and handset by 80% – whether you are making a call or
not. Eco Mode reduces the range of the base by approx. 50%. It is always better to use Eco
Mode when a reduced range is sufficient.
Switching off radiation
u
Eco Mode+
When you activate Eco Mode+, the radiation (DECT transmission power) of the base
and handset is switched off automatically and only turns on when calls are made. This
is also true when multiple handsets are used, if the handsets support Eco Mode+.
Eco Mode/Eco Mode+ can be activated/deactivated independently of one another and
can also be used with multiple handsets.
Activate/deactivate Eco Mode/Eco Mode+:
Ï
v
¢
Settings
§Change§
Press the display key (
If Eco Mode / Eco Mode+ is activated/deactivated, this will normally be indicated in the
display of the connected handset.
Status displays on the Gigaset SL610H PRO/C610H handset
Display icon
Ð i Ñ Ò
¼ red
Ð white
Ð green
¼ white
¼ green
¢ ¢
Eco Mode Eco Mode / Eco Mode+
³
= on).
Reception strength:
– Good to poor
– No reception
Eco Mode deactivated
Eco Mode enabled
Eco Mode+ enabled
(displays instead of the reception strength icon when in idle sta-
tus)
Eco Mode and Eco Mode+ enabled
ECO DECT
67