First steps
e.
INT 1
Connection for
outgoing Calls:
< IP3
Back
Instead of a connection, you can also select Sel. at each call. Each time you make a call,
you can then select the connection you wish to use on this handset.
If other handsets are already registered to the base, you are requested to assign send and
receive connections for the handsets. The following is shown in the display:
Assign connections to handset ?
¤
Perform steps
Connection Assist.
Connection -
28
>
Save
a.
to
e.
for each registered handset.
‰
assignment
complete
If the handset is to make calls via a different
connection/phone number:
¤
Press right on the control key
edly, until the required connection is dis-
played (in the example, IP3).
¤
Press the display key
tings.
After successfully configuring the settings, you
will briefly see this display.
v
repeat-
§Save§
to save the set-