Making Calls; Making An External Call - Gigaset N510 IP PRO Manual

Making calls

You can make calls on a Gigaset handset connected to your base.
Please note
You can make up to four external calls at the same time via your base, depending on
the quality of your DSL connection.

Making an external call

External calls are calls made via the public telephone network (fixed line, mobile phone
network) or via the Internet (VoIP).
To make an external call, you need to define one of the phone connections as a send con-
nection. You have the following options:
u
Assign a connection to the handset as a send connection permanently (
If necessary, you can use a "fallback" connection via a display key (
u
Select a send connection on the handset each time you make a call.
Permanently assigned send connection
Prerequisite:
A specific connection is assigned to the handset as a send connection (
~ c
Enter the number and press the talk key.
The number is dialled.
Or:
c
Press and hold. A list of your phone's connections will be displayed.
q
Select a line.
w
§Dial§
/
Press the display key or the middle of the control key.
~
Enter the number. The number is dialled approximately 3.5 seconds after the
last digit is entered.
Instead of the talk key
make a call in speaker mode.
In this user manual, each of these variants is indicated by "Press the talk key
The dialled number and the send connection used are shown in the display (e.g., via IP2).
The connection name you have assigned is displayed where available. Otherwise, the
default name is used.
Please note
If you use VoIP to make a call to the fixed line, you may also have to dial the area code
for local calls (depending on the provider). You can avoid having to dial your own area
code by entering it in the configuration and activating the Predial area code for local
calls via VoIP option (see Web configurator,
c
, you can also press the speaker key
d
£
page 103).
Making calls
£
page 81).
£
page 76).
£
page 81).
on the handset to
c
".
35