Gigaset N510 IP PRO Manual page 36

Making calls
Selecting a line for each call
Prerequisite: "Sel. at each call" has been assigned to the handset instead of a send con-
£
nection ( page
~ c
Enter the number and press the talk key. The list of all the phone's connec-
tions is displayed.
q
Select a line.
w
§Dial§
/ Press the display key or the middle of the control key.
If a dialling plan has been defined for the dialled phone number (
send connection specified in the dialling plan is used.
Please note
u
You can cancel the dialling process with the end call key
u
You are shown the duration of the call while the call is in progress.
u
Dialling using the directories or the handset's call and redial lists saves you retyp-
ing numbers.
u
If you have multiple handsets registered to the base, you can make internal calls
free of charge
Using an alternative connection/connection list on the display key
Prerequisite: You have assigned an "alternative connection" or the list with all configured
connections to a display key on the handset (
§Sel.Conn.§
Press the display key.
q
Select a line.
c
§Dial§
/ Press the talk key or display key.
~
Enter a number. The number is dialled approximately 3.5 seconds after the
last digit is entered.
Any dialling plan (
ignored. The selected send connection is always used.
Calling an IP address (provider-dependent)
You can also dial an IP address instead of a phone number.
¤
Press the star key
(e.g. 149*246*122*28).
¤
If necessary, press the hash
are calling to the IP address (e.g. 149*246*122*28#5060).
If your VoIP provider does not support the dialling of IP addresses, each part of the
address will be interpreted as a normal phone number.
36
81).
(page 71).
£
page 102) that has been defined for the dialled phone number is
*
to separate the sections of the IP address
#
key to attach the SIP port number of the person you
£
a
£
page 76).
page 102), then the
.