Gigaset N510 IP PRO Manual page 18

First steps
1. IP wizard – making VoIP settings
You will see the following display:
Before you can use VoIP to phone any other numbers over the Internet, the fixed line or
the mobile network, you need the services of a VoIP provider which supports the VoIP SIP
standard.
Prerequisite: You have registered with a VoIP provider (e.g., via your PC) and set up at
least one VoIP account (IP account).
To use VoIP, you now need to enter the access data for your VoIP account. You will receive
all the necessary data from your VoIP provider. This will include:
Either:
u
Your username (if requested by the VoIP provider).
This is the username of your IP account (caller ID), and is frequently identical to your
phone number.
u
Your authentication name or login ID
u
The (login) password registered with the VoIP provider
u
General settings for your VoIP provider (server addresses etc.)
Or:
u
An auto configuration code (activation code)
Your Gigaset phone's IP wizard can help you make these entries.
Please note
You can configure up to six VoIP connections. When you get started with the phone,
you can initially only configure one VoIP connection. You can configure additional
VoIP connections later with the IP wizard (
18
IP Assistant
Start IP
installation
assistant?
No Yes
£
page 80) or the Web configurator.