Activating "Anonymous Calling" For The Next Call; Configuring Settings During An External Call - Gigaset N510 IP PRO Manual

Making calls using select services

Activating "anonymous calling" for the next call

You can withhold your phone number for the next call (CLIR = Calling Line Identification
Restriction). The setting applies to all the phone's connections.
In idle status:
v Ç
¢
Select Services
Select and press
~
Enter the number or copy from the directory.
c
§Dial Number§
/
Press the display or talk key. The number is dialled.
You can also withhold your number for all calls generally

Configuring settings during an external call

Please note
The services described below are only available if parallel IP connections are permit-
ted.
Accepting a waiting call
You are making an external call and hear the call waiting tone.
§Accept§
Press the display key.
Once you have accepted the waiting call, you can switch between the two callers
£
swapping"
Please note
u
Without CLIP, a waiting call is only announced with a signal tone.
u
An internal waiting call is shown on the display. You can neither accept the internal
call nor reject it.
u
For instructions on accepting a waiting external call during an internal call
£
page 73.
Rejecting a waiting call
You can hear the call waiting tone but do not want to speak to the caller.
§Reject§
Press the display key.
The waiting caller hears the busy tone.
Please note
You can also press the end call key c
key again to accept the second call.
44
¢
Next Call anon.
§OK§
.
page 45) or speak to both at the same time ("Conference"
a
to end the current call, and then press the talk
£
page 41.
£
page
("Call
46).