Reboot & Reset; Save & Restore - Gigaset N510 IP PRO Manual

Restarting the device or restoring the factory settings
If your telephone no longer works as expected you can restart it. In most cases this will
solve the problem.
You can also reset the phone to its factory settings, e.g., if you give your device to a third
party. This deletes all settings, lists and directory entries!
You can restart the device or restore the factory settings via the Web page:
¢
Settings Management
Saving and restoring system settings
Once you have configured your base and after each configuration change, you can save
the current base settings in a file on the PC (suffix .cfg).
If you change the settings accidentally or you need to reset the base due to a fault (base
reset), you can reload the saved settings from the file on your PC to your phone.
The contents of the .cfg file include:
u
The settings for the local network (IP configuration)
u
The data for the (VoIP) connections established
u
The assignment of send and receive connections
u
Your own local area code and access code
u
The network mailbox number
u
The Internet services settings
u
The ECO DECT settings.
You can save and restore the system settings via the Web page:
¢
Settings Management
Configuring the phone via the Web configurator
¢
Reboot & Reset
¢
Save & Restore
109