Gigaset N510 IP PRO Manual page 92

Configuring the phone via the Web configurator
Working area
Depending on the function selected in the navigation area, information or dialog boxes
are displayed in the working area that allow you to make or change your phone settings.
Making changes
Make settings via input fields, lists or options.
u
There may be restrictions regarding the possible values for a field e.g., the maximum
number of characters, entering special characters or certain value ranges.
u
To open a list, click
u
There are two kinds of options:
– Checkboxes: You can activate one or more options from a list. Active options are
indicated by
clicking
deactivate an option by clicking
– Alternative options (radio buttons): The active option in the list is indicated by
and the non-active by
activated option is deactivated. You can only deactivate an option by activating
another option.
Entering Cyrillic and Turkish characters
In the following section, the specified maximum number of characters permitted in a field
refers to Latin characters and digits (1 character = 1 byte), i.e., 1 character means 1 byte.
Cyrillic and Turkish characters require 2 bytes each, e.g., with a field length of 16 charac-
ters, you can enter a maximum of eight Cyrillic or Turkish characters.
If you enter too many characters into a field, the entry is rejected (not saved in the phone).
The "old" field content (or the default settings) is retained and displayed again when the
Web page is updated. No warning/confirmation is given.
Applying changes
As soon as you have made your change on a page, save and activate the new setting on
the phone by selecting Set.
If your entry does not comply with the rules for this field, an appropriate error message is
displayed. You can then repeat the input.
Warning
Changes that have not been saved on your phone are lost if you move to another Web
page or the connection to the Web configurator is lost, e.g., due to exceeding the time
£
limit ( page
92
V
. You can choose between default values.
‰
, non-active options by
. The status of the other options in the list does not change. You can
. You can activate an option by clicking
90).
. You can activate an option by
‰
.
.
,
. The previously