Configuring the system settings
Resetting the base to the default settings
The individual settings are reset.
Resetting the base via the menu
When the settings are restored:
u
Handsets are still registered
u
The system PIN is not reset.
The following settings in particular are reset to the default settings (you can change the
settings marked "*" via the Web configurator):
u
The entered VoIP connections (are deleted)
u
The assignment of send and receive connections
u
Audio settings for VoIP connections *
u
DTMF settings *
u
Own area code
u
Settings for the local network
u
The names of the handsets
u
Eco Mode and Eco Mode+ are deactivated
u
PABX connection settings
u
Digit and display key assignments as well as the
u
Settings for select services: call divert
Call lists are deleted.
¢
Ï Settings
v
~
Enter the system PIN and press
§Yes§
Press the display key.
After the reset, the base is restarted. The restart takes around ten seconds.
The installation wizard is launched (
84
¢
¢
System
Base Reset
£
page
key
§OK§
.
16).