Date/Time - Gigaset N510 IP PRO Manual

Completing the installation
The handset then returns to idle status (an example of the display in idle status):
Displays
u
Reception between the base and the handset:
– Good to poor:
– No reception:
Green: Eco Mode enabled
u
Charge status of the batteries:
y y { {
–
y
– Flashes red: batteries almost empty
xy x{ x{
–
u
INT 1
Internal name of the handset
Please note
To protect your phone and its system settings from unauthorised access, you can
define a 4-digit number code (system PIN) known only to yourself. This code must be
entered before you can register/de-register handsets or alter your phone's VoIP or
LAN settings.
The default system PIN is 0000 (4 x zero).
For instructions on changing the PIN

Date/time

There are two methods of setting the date and time:
u
By default, your phone is configured so that the date and time are transferred from a
time server on the Internet, provided it is connected to the Internet.
You can activate/deactivate the synchronisation with a time server via the Web config-
£
urator ( page
u
You can also set the date and time manually via the menu on one of the registered
£
handsets (
The date and time must be set in order to show the correct time for incoming calls, for
example.
Ð i Ñ Ò
¼
(red)
(Empty to full)
(Charging)
106).
page 75).
£
page 77.
First steps
i
V
07:15
INT 1 14 Oct
Calls Calendar
29