Table of Contents
Advertisement
Please note
You can also make the settings for the
local network via the Web configurator
¢
(
operating instructions for the Web
configurator on the enclosed CD).
Configuring VoIP
connections
You can configure up to six VoIP connections
on your telephone, i.e., you can assign up to
six VoIP phone numbers to your phone.
You need to set up an IP account (VoIP
account) with a VoIP provider for each con-
nection. You must save the access data for
this IP account on your phone. The IP wizard
will help you to do this.
Starting the IP wizard:
¢
¢
v
ÏSettings
You will see the following question in the
display:
IP Wizard
Start IP
installation wizard?
No
The remaining procedure for the IP wizard is
described on
page
21.
VoIP Wizard
Yes
Configuring the system settings
Each time you run the IP wizard you can
configure/reconfigure one VoIP connection
(IP account).
¤
Restart the IP wizard if you wish to config-
ure/reconfigure another VoIP connec-
tion.
Automatic update for the VoIP
provider settings
After the first download of the VoIP provider
settings, your phone will check daily
whether a newer version of the file for your
VoIP provider is available from the Internet
on the configuration server. If there is an
update available, the message New profile
available. Update? is displayed in the idle
display of the base.
§Yes§
Press the display key to confirm
the prompt.
~
Enter the system PIN if neces-
sary and press
The new data for your VoIP provider will be
downloaded and saved on the phone.
If you answer the prompt with
phone returns to idle status. Your telephone
will not remind you of this new profile again.
The message will only be shown again if a
newer version of the provider data is availa-
ble.
A profile update will only be started if no
other profile or firmware update is taking
place at the time.
§OK§
.
§No§
, the
119
Advertisement
Table of Contents
