Gigaset N510 IP PRO Manual page 79

¢ ¢
v Ï Settings
~
If the system PIN is not 0000: enter the system PIN and press
¤
You can enter data in the following fields:
IP Address Type
Select Static or Dynamic.
For IP Address Type Dynamic:
The following fields show the current settings that the phone obtained from the
router. These settings cannot be changed.
For IP Address Type Static:
You must manually define the IP address and the subnet mask for the phone as well as
the default gateway and DNS server in the following fields.
For IP Address Type Static:
IP Address
Enter the IP address that is to be assigned to the phone (overwriting the current set-
tings).
The default is 192.168.1.2.
For information on the IP address, see the glossary (
Subnet Mask
Enter the subnet mask to be assigned to the phone (overwriting the current settings).
The default setting is 255.255.255.0
For information on the subnet mask, see the glossary (
DNS Server
Enter the IP address for the preferred DNS server. The DNS server (Domain Name Sys-
£
tem, page 124) converts the symbolic name of a server (DNS name) into the public
IP address for the server when the connection is made.
You can specify your router's IP address here. The router forwards phone address
requests to its DNS server.
The default is 192.168.1.1.
Default Gateway
Enter the IP address for the default gateway (
network is connected to the Internet. This is generally the local (private) IP address for
your router (e.g., 192.168.1.1). Your phone requires this information to be able to
access the Internet.
The default is 192.168.1.1.
¤
§Save§
Press to save the settings.
Please note
You can also make local network settings via the Web configurator (
¢
System Local Network
Configuring the system settings
£
page 127).
£
page 132).
£
page 126) through which the local
§OK§
.
£
page 97).
79