Gigaset N510 IP PRO Manual page 25

2. Connection wizard
Using the connection wizard, you can assign the previously configured connections
£
( page 18) to the internal parties as receive or, if applicable, as send connections. Inter-
nal parties are the registered handsets.
u
Receive connections are the phone numbers (connections) on which you can be
called. Incoming calls are only forwarded to the internal parties (end devices) for which
the relevant connection is assigned as receive connection.
u
Send connections are the numbers that are sent to the called party. The network pro-
vider calculates charges based on the send connections. You can assign each internal
party a number or the associated connection as a send connection.
u
Each connection (number) of your phone can be both a send as well as a receive con-
nection. You can assign each connection to several internal parties as a send and/or
receive connection.
Default assignment
All configured connections are assigned to the handsets as receive connections at regis-
tration/start-up.
The first configured VoIP connection is assigned to the handsets as a send connection.
First steps
25