Specifications - Gigaset N510 IP PRO Manual

Specifications

Base power consumption
In standby mode: approx. 1.2 W
During a call: approx 1.3 W
General specifications
Interfaces
DECT standard
GAP standard
No. of channels
Radio frequency range
Duplex method
Repeat frequency of the transmission
pulse
Length of the transmission pulse
Channel grid
Bit rate
Modulation
Language code
Transmission power
Range
Power supply
Power over Ethernet
Environmental conditions for operation +5°C to +45°C;
Codec
Quality of Service
Protocols
Ethernet
Supported
Supported
60 duplex channels
1880–1900 MHz
Time multiplex, 10 ms frame length
100 Hz
370 μs
1728 kHz
1152 kbit/s
GFSK
32 kbit/s
10 mW, average power per channel
250 mW pulse power
up to 300 m outdoors, up to 50 m indoors
230 V ~/50 Hz
PoE, IEEE 802.3af, class 3
20% to 75% relative humidity
G.711, G.726, G.729AB with VAD/CNG, G.722
TOS, DiffServ
SIP, RTP, DHCP, NAT Traversal (STUN), HTTP
Appendix
121