Configuring Voip Connections, Assigning Send And Receive; Connections - Gigaset A510IP User Manual

Setting the base

Configuring VoIP connections, assigning send and receive

connections

You can configure up to six VoIP connections on your phone, i.e., you can assign up
to six VoIP phone numbers to your phone.
You need to set up an IP account (VoIP account) with a VoIP provider for each VoIP
connection. You must save the access data for this IP account on your phone.
You can assign the VoIP phone numbers to the registered handsets as send and/or
receive connections.
The VoIP wizard supports you in configuring VoIP connections and assigning them
to the handsets:
¤
§Menu§
The procedure for the VoIP wizard is described on
Each time you run the VoIP wizard you can configure/reconfigure one VoIP connec-
tion (IP account).
¤
Restart the VoIP wizard if you wish to configure/reconfigure another VoIP con-
nection.
Please note
u
You can also use the Web configurator to configure and manage VoIP con-
nections
u
You can change the assignment of send and receive connections to the
handsets via the Web configurator
Number assignment:
u
If a new connection is configured, it is automatically assigned as the receive con-
nection to all handsets.
u
During registration, each handset is automatically assigned the fixed line con-
nection as a send connection and all base connections as receive connections.
u
The Gigaset.net connection is not included in the selection for the send connec-
tions. Gigaset.net numbers (suffix #9) are automatically dialled via Gigaset.net.
u
If the VoIP connection assigned to a handset as a send connection is deleted or
deactivated, the fixed line connection is assigned as the send connection.
u
If a connection is not assigned as the receive connection to any internal party,
calls on this connection will not be signalled.
110
¤
Ï Settings
Telephony
¢
( page 131).
¤
VoIP Wizard
page
¢
( page 133).
24.