Gigaset N510 IP PRO Manual page 23

You have not been able to download your provider's data
If your VoIP provider does not appear in the list, i.e. its general data is not provided for
download, you must cancel the IP wizard:
¤
Briefly press the end call key a repeatedly until End assistant? appears in the
display and then press the display key
You can perform the subsequent steps of the installation wizard.
You must then make the required VoIP provider and IP account settings using the Web
configurator. You receive the general provider data from your VoIP provider.
You can change the assignment of the VoIP connection as send/receive connection at
a later time via the telephone menu or the Web configurator.
Entering user data for your VoIP account
You are now prompted to enter your personal access data for your VoIP account.
The following are provider-dependent:
u
Authentication , Authentication ,
Please note ...
... when entering access data, it is case sensitive.
To switch between upper and lower case and digits, press the
if necessary). You can see briefly in the display whether upper case, lower case or digit
input is selected.
Characters entered incorrectly can be deleted using the left display key below Ñ.
The character to the left of the cursor is deleted.
You can navigate within the input field using the control key
IP Assistant
Name:
< C
§Yes§
¤
Abc
OK
¤
.
#
r
(left/right).
Using the keypad, enter the User ID that
you received from your VoIP provider.
§OK§
Press the key under
screen.
First steps
key (several times
on the display
23