Gigaset N510 IP PRO Manual page 104

Configuring the phone via the Web configurator
Please note
u
The settings for DTMF signalling apply to all VoIP connections (VoIP accounts).
u
DTMF signals cannot be transmitted in the audio path (Audio) on broadband con-
nections (the G.722 codec is used).
Configuring call transfer via VoIP
You can change the settings for call transfer in the Call Transfer area on the Web page:
¢
Settings Telephony
You can connect an external call to one of your VoIP connections with a second external
participant (depending on the provider). You do this by establishing an external consul-
tation call to the second participant and pressing the R key on the handset once you have
registered the second participant. The call is transferred.
You can expand or change the settings for call transfer as follows:
u
You can activate call transfer by ending the call. The two external participants are con-
nected with one another when you press the end call key
connections with the participants are terminated.
u
You can activate direct call transfer. You can then transfer the call before the second
participant has answered.
u
You can deactivate call transfer with the R key if you want to assign a different feature
to the R key (see below
Defining R key functions for VoIP (hook flash)
You can specify the function for the R key on the Web page:
¢
Settings Telephony
Your VoIP provider may support special performance features. To make use of these fea-
tures, your phone needs to send a specific signal (data packet) to the SIP server. You can
assign this "signal" as the R function to the R key of the handsets. Prerequisite: The R key
is not used for call divert (default setting, see above).
If you press this key during a VoIP call, the signal is sent. This requires that DTMF signalling
via SIP info messages is activated on the phone (see above).
104
¢
Advanced VoIP Settings
"Defining R key functions for VoIP (hook
¢
Advanced VoIP Settings
a
on the handset. Your
flash)").