De-Registering Handsets; Locating A Handset, Finding The Phone's Ip Address ("Paging") - Gigaset N510 IP PRO Manual

Connecting/using handsets
2) On the base
Within 60 seconds, press and hold the registration/paging button on the base
£
( page 3) (for approx. 3 seconds).
Please note
All base connections are assigned to a handset as receive connections as soon as regis-
tration is complete.
The first configured VoIP connection is assigned to the handset as a send connection.
You can change the assignment
Assigning the internal number
The base assigns the handset the lowest free internal number (possible numbers: 1–6).
The internal number appears in the handset's display, e.g., INT 2. This means that the
internal number 2 has been assigned to the handset.

De-registering handsets

Ï
v
¢
Settings
s
Select the internal party you wish to de-register and press
(The handset you are currently using is highlighted with <).
~
If the system PIN is not 0000: enter the current system PIN and press
§Yes§
Press the display key.

Locating a handset, finding the phone's IP address ("paging")

You can locate your handset using the base.
¤
Briefly press the registration/paging button on the base (
All handsets will ring at the same time ("paging"), even if the ringtones are switched off.
The current (local) IP address for the base appears in the handset displays.
(e.g., on the Gigaset SL610 PRO).
Ø å Ú
Paging
IP: 192.168.1.2
70
£
¢
Registration
Silence
page 81.
¢
De-reg. Handset
§OK§
.
§OK§
£
page 3).
.