Gigaset N510 IP PRO Manual page 65

The list of VoIP connections that are assigned to the handset as receive connections is dis-
played. Net AM: xxx is displayed, where xxx is replaced by the respective default connec-
tion name (Net AM: IP1 to Net AM: IP6).
s
Select entry and press
If a number is already stored for this network mailbox, fast access is activated
immediately.
a
Press and hold the end call key (idle status).
If no number is saved for the network mailbox, you are asked to enter the number of the
network mailbox.
s
Jump to the Network Mailbox line.
~
Enter the number for the network mailbox.
§Save§
Press the display key.
a
Press and hold the end call key (idle status).
Fast access is activated.
Please note
You can only assign fast access to one network mailbox.
You can also call the network mailbox for a handset's receive connections directly via
£
the message key (
Calling the answering machine via fast access
Press and hold.
If you have set a network mailbox for fast access, you are connected directly to this net-
work mailbox.
d
If necessary, press the speaker key.
You hear the network mailbox announcement.
Displaying new messages in the handset's idle display
If a new message is present on one of the network mailboxes assigned to the handset via
its receive connection, or on the local answering machine, the symbol à and the
number of new messages are generally shown on the idle display. The f message key
flashes.
Ø
§Select§
(
page 66).
Using the network mailbox
= on).
65