De-Registering Handsets; Locating A Handset ("Paging") - Gigaset A510IP User Manual

De-registering handsets

You can de-register all other registered handsets from each of the registered
Gigaset handsets.
¤
§Menu§
s
~
§OK§

Locating a handset ("paging")

You can locate your handset using the base.
¤
Briefly press the registration/paging button on the base
¤
All registered handsets will ring at the same time ("paging"), even if the ring-
tones are switched off.
The current (local) IP address for the base appears in the handset displays.
Ending paging
¤
Press the registration/paging key on the base station briefly.
Or:
¤
Press the talk key c or end call key a on the handset.
Or:
¤
Press the display key
Or:
¤
Do not press any key on the base or handset:
After approx. 30 seconds, the paging call will end automatically.
Please note
u
An incoming external call will not interrupt the paging process.
u
If there are already two internal connections between the handsets, then
paging is not possible.
u
A paging call is also signalled acoustically on handsets where the ringtone is
permanently deactivated.
¤
Settings Registration
Select the internal number you wish to de-register and press
(The handset you are currently using is highlighted with <).
Enter the current system PIN if necessary and press
Press the display key.
§Silence§
¤
De-register Handset
on the handset.
Using multiple handsets
§OK§
.
§OK§
.
¢
( page 9).
97