Table of Contents
Advertisement
Connecting/using other devices
Please note
All base connections are assigned to a
handset as receive connections as soon as
registration is complete. If a mobile is regis-
tered via Bluetooth, its GSM connection is
also assigned to the handsets as a receive
connection.
When connection to the analogue fixed
line is established, this connection is
assigned to the handset as a send connec-
tion.
Assigning the internal number
The base assigns the lowest free internal
number to the handset (possible numbers:
2–7). The internal number is shown on the
handset display e.g., INT 2. This means that
the handset has been assigned the internal
number 2. The base is assigned the internal
number 1.
De-registering handsets
On the base:
¢
Ï
¢
v
Registration
¢
De-register Handset
The list of registered devices (internal par-
ties) is displayed.
s
Select the internal party you
wish to deregister and press
~
Enter the current system PIN if
necessary and press
§Yes§
Press the display key to confirm
the prompt.
The handset is deregistered immediately,
even if it is not in idle status.
98
Locating a handset (paging)
You can use the base to search for the regis-
tered handsets.
Prerequisite: There are internal parties reg-
istered on the base. There are a maximum of
two connections between the internal par-
ties.
u
Find Handset
All reachable handsets ring simultaneously
("paging"), even if the ringers are deacti-
vated.
An external call will not interrupt the paging
process.
Ending paging
¤
You can end the paging call prematurely by
pressing the talk or end call key on one of
the handsets.
The paging call ends automatically after
approx. 30 seconds.
Making internal calls
§OK§
.
Internal calls using registered handsets are
§OK§
.
free of charge.
Calling a specific handset
u
~
If the receiver is replaced, the base switches
to handsfree mode.
Or:
u
s
c
Open the list of internal parties.
Your own entry in the list is
marked with a < symbol.
Select and press
Press the red end key
replace the receiver.
Initiate internal call.
Enter the number of the internal
party.
Initiate internal call.
Select the internal party.
Pick up the receiver.
§OK§
.
T
or pick up/
Advertisement
Table of Contents
