De-Registering Handsets; Locating A Handset ("Paging"); Making Internal Calls - Gigaset A580 Instruction Manual

Using several handsets

De-registering handsets

Handsets can only be de-registered by reset-
ting the base station to its default settings.
This will also reset every other setting
¢
page 46.

Locating a handset ("paging")

You can locate your handset using the base
station.
¤
Briefly press the registration/paging key
on the base station (
¤
All handsets will ring simultaneously
("paging"), even if the ringer tones are
deactivated.
Ending paging
¤
Briefly press the registration/paging key
on the base station or press the talk key
c on the handset.

Making internal calls

Internal calls to other handsets registered on
the same base station are free.
Calling other handsets
k
Start internal call. The display
shows Insert INT No..
~
Enter the internal number of the
receiving handset and press
The handset is called.
or:
§All§
Press the display key and
handsets are called.
Ending a call
a
Press the end call key.
42
¢
page 2).
§OK§
.
§OK§
. All
Transferring a call to another
handset/making an internal
consultation call
You are talking to an external participant
and can call an internal participant at the
same time to forward the call or to consult.
¤
Calling internal participants
When an internal participant answers:
¤
If necessary announce the external call.
Either
a
Press the end call key. The call is
transferred.
or
Ç
Press the display key. You are
reconnected with the external
participant.
When transferring a call you can also press
the end call key a before the internal par-
ticipant answers. Then, if the internal partic-
ipant does not answer or the line is busy, the
call will automatically return to you (the dis-
play will show Recall).
Answering a waiting call
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). The caller's number will
appear in the display if phone number iden-
tification is enabled.
a
Press the end call key to end the
internal call.
c
Press the talk key to take the
external call.