Removing Finisher Tray Cover Assembly - Panasonic DP-C305 Service Manual

Ver. 1.1
(6) Remove 1 Screw (14021).
(7) Remove the Rear Cover Assembly (14105).
Note:
When re-installing the Cover, make sure 2 Latch
Hooks are in the holes.
<Removing Finisher Tray Cover Assembly>
(8) Remove 2 Screws (14021).
(9) Remove the Tray Assembly (14015).
<Removing Finisher Controller PC Board>
(10) Remove 2 Screws (14132) and 2 Washers
(14134).
(11) Remove the Right Cover (14104).
(12) Lift the PCB Cover Mylar (14135) up.
870
DP-C405/C305/C265
FEB 2008