Panasonic DP-C305 Service Manual page 743

(2) @sender to @end
(3) @select-domain to @end : @select-domain to @end: Enter selected domain names
(4) @relay-domain to @end : @relay-domain to @end: Enter domain names between
(5) @system to @end
(6) @ldap to@end
(7) @mib to @end
Ver. 1.1
: @sender and @end: Enter sender (From) information between
@sender and @end in (2).
Enter up to 24 user names and email addresses for sender
selection.
Enter a semicolon (;) to delimit each block of data. If the
subsequent fields are blank, insert a semicolon (;) to delimit
each blank field.
Each set of sender selection entry data must be complete within
a single line.
The syntax is <Sender selection number>; <User name>;
<email address>.
(a) 01 to 24 : Sender selection number indication
(b) User name : (up to 25 alphanumeric characters)
(c) Email address : (up to 60 characters)
between @select-domain and @end in (3). Up to 10 selected
domain names can be programmed.
@relaydomain and @end in (4).
Enter the names of up to 10 domains authorized to relay
transmissions on a LAN from Internet Fax to general Fax.
: @system to @end: Enter Internet parameters in place of
@system to @end in (5).
The following Internet parameters need to be programmed:
(a) Default domain (up to 50 characters)
The syntax is domain; <Default domain>
(b) Administrator email address (up to 60 characters)
The syntax is manager; <administrator email address>
(c) Relay password (up to 10 characters)
The syntax is relay; "<relay password>"
(d) Remote password (up to 10 characters)
The syntax is remote; "<remote password>"
The remote password must be enclosed with a double quote
(") as in the example.
: Defines the LDAP Parameters to be set in section (6) between
@ldap to @endblock. Register the following Internet
Parameters.
(a) LDAP Server Name (up to 60 characters).
The syntax is: server; <LDAP Server Name>
(b) LDAP Login Name (up to 40 characters).
The syntax is: login; <LDAP Login Name>
(c) LDAP Password (up to 10 characters).
The syntax is: password; "<LDAP Password>". Quotation
marks " " enclosing the password, is required, as shown in
the example.
(d) LDAP Search Base (up to 60 characters).
The syntax is: base; <LDAP Search Base>
: (a) Community name (1) (up to 15 characters)
The syntax is com_name1; < community name>.
(b) Community name (2) (up to 15 characters)
The syntax is com_name2; < community name>.
(c) device name (up to 31 characters)
The syntax is device; < device name>.
(d) Device location (up to 31 characters)
The syntax is location; <device location>.
743
DP-C405/C305/C265
FEB 2008