Processing Tray Paper Stacking Operation; Offset Operation - Panasonic DP-C305 Service Manual

2. Processing Tray Paper Stacking Operation

A sheet coming between the Delivery Rollers is fed onto the Processing Tray. Then, the Paddle Taps
on the sheet surface twice (once for the second and subsequent sheets) to position the sheet against
the Processing Tray Stopper.

3. Offset Operation

Each sheet is pulled forward, or backward using the Aligning Plate (Front) and the Aligning Plate
(Rear).
The offset operation is performed each time a sheet is pulled onto the Processing Tray.
Ver. 1.1
Paper
Aligning Plate
Delivery Belt
Tray
Fig. 2-019 Offsetting in the forward direction
Tray
Fig. 2-020 Offsetting in the backward direction
Paddle
Stack Delivery Roller (Upper)
Swing Guide
Processing Tray Stopper
Stack Delivery Roller (Lower)
Fig.2-018
Aligning Plate (Rear)
Sheet to be offset
Aligning Plate (Front)
Aligning Plate (Rear)
Sheet to be offset
Aligning Plate (Front)
777
DP-C405/C305/C265
FEB 2008