Table of Contents
Advertisement
3.3 Disassembly/Assembly
Location
1
2
2
3
2
4
2
1
3
1
3-2
Procedure
(1) Remove the original catch tray 1.
(2) Remove the original catch tray 2.
(FA-F350)
1
(1) Remove the left side cover (3
screws).
(1) Open up the paper feed section.
(2) Remove the stopper (1 shoulder
screw).
Note: Removing the stopper allows
paper feed section to open
completely allowing easy
access to the feed rollers.
Removal of upper pick up roller
and paper feed/DFP roller
(1) Remove the original feed cover
(upper) (3 screws).
(2) Remove touch rings (x2).
1
(3) Remove the link.
(4) Slide the upper pick up roller and
paper feed roller off of their shafts.
(5) Replace rollers and reassemble
in reverse order.
Check
Advertisement
Table of Contents
