Removing The Hard Disk Drive Unit - Panasonic DP-C305 Service Manual

Ver. 1.1
(60) Remove 3 Screws (X5).
(61) Release 2 PCB Spacers (4016).
(62) Remove the IH PC Board (4020).
<Removing the Hard Disk Drive Unit
(DP-C405 Series Only)>
(63) Remove the DC12 Harness and the SATA
Harness from Harness Clamps.
(64) Disconnect the HD2 Harness from the HDD
Connector.
(65) Disconnect the DC12 Harness on the SC PC
Board (CN55).
(66) Disconnect the SATA Harness on the SC PC
Board (CN10).
Caution:
When reinstalling the SATA Harness, take note of
the connector position. Insert it gently, and do not
force the connector if it is facing the wrong way.
(67) Remove 1 Screw (X5) and the Ground
Harness.
(68) Remove the DC12 PC Board Assembly.
Caution:
When reinstalling the Ground Harness, make sure
that the Terminal is in a Vertical position as
illustrated.
(69) Remove 2 Screws (4026).
(70) Remove the HDD Assembly.
Caution:
Exercise care to prevent the HDD from Shock, and
Vibration damage.
170
DP-C405/C305/C265
FEB 2008