Panasonic DP-C305 Service Manual page 693

Ver. 1.1
(5) Attach the Delivery Tray with 4 Screws (M4 x 7)
as illustrated.
(6) Open the Front Door of the Finisher, then insert
the Stapler along the Guide Rails.
Caution:
Remove all Tapes from the Stapler before
installing. The Stapler cannot be removed from the
Finisher once installed.
(7) Close the Front Door of the Finisher.
(8) Place the Bracket in its original position, then
secure it with Screws. Slide the Finisher toward
the Host Machine, and connect it to the Host
Machine.
(9) Attach the Label as illustrated.
(10) Connect the Finisher to the Host Machine with
the Interface Cable.
Caution:
Before connecting the Interface Cable, make sure
to turn the Power Switch and the Main Power
Switch of the Host Machine to the OFF position,
and unplug the AC Power Cord from the wall outlet
to avoid shock hazards.
693
DP-C405/C305/C265
FEB 2008