Tonal Signal - Panasonic DP-C305 Service Manual

5.2.5.2.

Tonal Signal

This Service Mode is used to check the tonal signal output. Signals can be output to the line using the
following procedure.
Set the machine to Service Mode, and press the "9" key on the Control Panel.
↓
Press the "Start" key to enter the F9 Service Mode on the Control Panel.
↓
Select "00 Fax Service Mode" on the Touch Panel display.
↓
Select "04 Modem tests" on the Touch Panel display.
↓
Select "02 Tonal Signal" on the Touch Panel display.
↓
Select the desired parameter on the Touch Panel display, and then press the "Start" key on the Control
Panel.
↓
Press the "Stop" key on the Control Panel.
↓
Select the "Close" button three time on the Touch Panel display.
↓
Press the "Function", and the "C (Clear)" keys simultaneously on the Control Panel to exit the Service
Mode.
Ver. 1.1
Tonal Signal Table
Signals
462 Hz
1080 Hz
1100 Hz
1300 Hz
1650 Hz
1850 Hz
2100 Hz
580
DP-C405/C305/C265
FEB 2008