Host Name Query On Dns Server; Ns (Name Server) Record In Domain; Mx (Mail Exchange) Record In Domain; A (Address) Record In Domain - Panasonic DP-C305 Service Manual

When the packet does not reach the specified destination even when the physical connection is
properly made, check the registered persistent routes on the same subnet as the Unit by typing "route
print" in the DOS command-line. The output display is shown below:
C:\WINDOWS>route print
Active Routes:
Network Address
0.0.0.0
127.0.0.0
192.168.3.0
192.168.3.2
192.168.3.255
224.0.0.0
255.255.255.255

6. Host Name Query on DNS Server

Windows XP/2000/NT 4.0 also has a tool that enables you to test DNS to verify that it is working
properly. This utility is not available on Windows 98/Me.
From the DOS command-line, type "nslookup" to display the following output:

NS (Name Server) Record in Domain

From the DOS command-line, type "Is -t NS <Domain Name>" to display the following output:

MX (Mail Exchange) Record in Domain

From the DOS command-line, type "Is -t MX <Domain Name>" to display the following output:

A (Address) Record in Domain

From the DOS command-line, type "Is -t A <Domain Name>" to display the following output:
(To leave from this menu, type "exit" on the command-line.)
Ver. 1.1
Netmask
0.0.0.0
255.0.0.0
255.255.255.0
255.255.255.255 127.0.0.1
255.255.255.255 192.168.3.2
224.0.0.0
255.255.255.255 192.168.3.2
C:\>nslookup
Default Server: sv1.labo.pcc.com
Address: 192.168.1.1
> ls -t NS labo.pcc.com.
[sv1.labo.pcc.com.]
labo.pcc.com. NS server = sv1.labo.pcc.com
> ls -t MX labo.pcc.com
[sv1.labo.pcc.com]
labo.pcc.com.
> ls -t A labo.pcc.com
[sv1.labo.pcc.com]
labo.pcc.com. NS server = sv1.labo.pcc.com
sv1
A
sv2 A
ec5 A
A
ec4
ef1 A
Gateway Address
192.168.3.254
127.0.0.1
192.168.3.2
192.168.3.2
MX 10 sv2.labo.pcc.com
192.168.1.1
192.168.1.2
192.168.1.4
192.168.3.4
192.168.3.5
444
DP-C405/C305/C265
Interface Metric
192.168.3.2 1
127.0.0.1 1
192.168.3.2 1
127.0.0.1 1
192.168.3.2 1
192.168.3.2 1
192.168.3.2 1
FEB 2008