Panasonic DP-C305 Service Manual page 566

No. Parameter
024 CED Frequency
025 COMM. Start-Up
026 Non-Standard
027 Short Protocol B
028 Short Protocol D
029 Remote
Diagnostics
030 CED & 300 bps
031 RTC = EOL x 12
032 V34 TX Start
033 V34 RX Start
034 V34 TX SR
035 V34 RX SR
036 Not Used
037 Protocol Display
038 Not Used
039 Flash Time
040 Flash Time
(PSTN)
041 Pause Time
042 Not Used
043 Redial Interval
Ver. 1.1
Function Parameter Table
Selections
1080 Hz (non ITU-T)
2100 Hz
First
Second
Off (Invalid)
On (Valid)
Off (Invalid)
On (Valid)
Off (Invalid)
On (Valid)
Off (will not accept)
On (accepts)
75 ms
1 sec
Off (EOLx6)
On (EOLx12)
2400-33600bps
2400-33600bps
2400-3429sr
2400-3429sr
Off (not displayed)
On (displayed)
50 ms
~
1000 ms
50 ms
~
1000 ms
1 = 1 sec.
~
10 = 10 sec.
0 = no waiting
~
15 = 15 minutes
Selects the CED frequency 2100/1080 Hz
Selects the communication start-up condition (XMT
and Polling).
(Used when Echo Suppression is disabled.)
Selects own mode (Panafax mode).
Selects the short protocol mode.
Selects the short protocol mode. When activated, it
allows the machine to automatically store the modem
speed for each Auto Dial Number.
Selects whether the machine accepts Remote
Diagnostics from the service station.
Selects the pause interval between the CED, and the
300 bps signal.
(Used when Echo Suppression is disabled.)
Selects the RTC signal, EOLx6 or EOLx12.
Selects the transmission modem start speed for V.34
communication, 33600-2400 bps.
Press " " or "
Selects the receiving modem start speed for V.34
communication, 33600-2400 bps.
Press " " or "
Selects the transmission symbol rate for V.34, 3429/
3200/3000/2800/2400 sr.
Press " " or "
Selects receiving symbol rate for V.34, 3429/3200/
3000/2800/2400 sr.
Press " " or "
Selects whether to display the modem speed during
communication.
(Press the Job Status Key to display)
Selects the pause interval before activating the Flash
key.
Selects the pause interval before activating the Flash
key.
(For Germany, Austria and Czech)
Selects the pause interval from 1 sec. ~ 10 sec. for
dialing through a switchboard, or for international
calls.
Selects the redial interval from 0 to 15 minutes in 1
minute steps.
566
DP-C405/C305/C265
Function
" to select the symbol rate.
" to select the symbol rate.
" to select the symbol rate.
" to select the symbol rate.
FEB 2008