Process Unit; Replacing The Developer Unit - Panasonic DP-C305 Service Manual

2.2.11. Process Unit <Replacing the Developer Unit >
Ver. 1.1
<Replacing the Developer Unit>
Note:
The procedure below describes how to replace the
Developer Unit for the Cyan Color.
(1) Open the Front Cover.
Caution:
When the windows shown by the arrow are Yellow,
close all of the doors, and turn the Main Power
Switch OFF, and ON again. After the machine
completes the warm-up routine, turn the Main
Power Switch OFF, and confirm that the windows
are BLACK prior to removing Drum Unit.
(2) Remove the Toner Waste Container.
Note:
Exercise care not to incline the container, or Toner
may spill out.
(3) Turn the Toner Cartridge (Cyan)
counterclockwise.
(4) Pull the Toner Cartridge (Cyan) out.
144
DP-C405/C305/C265
FEB 2008