Jam Sensor Location Of Printer - Panasonic DP-C305 Service Manual

Note:
If the machine is jammed, follow the procedure below.
1. Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the machine to
the OFF position. (If the Hard Disk Drive Unit is installed, turn the Power Switch on the Left Side of
the machine to the OFF position first. After waiting approximately 10 seconds, turn the Main Power
Switch on the Back of the machine to the OFF position.)
2. Remove the Jammed paper.
3. Turn the Main Power Switch on the Back, and the Power Switch on the Left Side of the machine to
the ON position.
4. Press the "Function", and the "3" keys on the Control Panel.

• Jam Sensor Location of Printer

Outer Exit Sensor (1819-20)
Ver. 1.1
Inner Exit Sensor (1819-39)
Fuser Paper Exit Sensor (1819-32)
Fuser Entrance Sensor (1819-43)
Intermediate Transfer Belt
Registration Sensor 2 (1918-01)
Registration Sensor 1 (2110 : ROHP PCB)
Optional Intermediate Roller Sensor (2130)
OHP Film Sensor (2110 : ROHP PCB)
Paper Path Sensor (Tray 1) (1919)
Paper Tray 1
Paper Path Sensor (Tray 2) (1919)
Paper Tray 2
Paper Path Sensor (Tray 3) (1919)
Paper Tray 3
Paper Path Sensor (Tray 4) (1919)
Paper Tray 4
449
Paper Path Sensor
(Paper Transport Unit) (1819-21)
Paper Path Sensor (ADU 0)
(1819-38)
DP-C405/C305/C265
Paper Path Sensor
(ADU 1) (1819-31)
ADU
Paper Path Sensor
(ADU 2) (1819-07)
Sheet Bypass
NP Sensor (1819-37)
Sheet Bypass
Intermediate Roller Jam
Sensor (1819-01)
Optional Intermediate Roller
Jam Sensor (1819-03)
FEB 2008