Panasonic DP-C305 Service Manual page 152

Ver. 1.1
(41) Reinstall the Hopper Unit.
Note:
1. When reinstalling, make sure that the 2
projections on the Hopper Unit are seated in the
2 Holes firmly, and at the same time, the supply
cylinder is properly positioned as illustrated.
2. If the Hopper Unit are not seated firmly, it may
cause the problem U13 (No Toner or Low Toner)
(42) Reinstall the WTB Lower Cover.
(43) Reinstall the Pipe Cover.
(44) Reinstall the Inner Cover.
(45) Remove the papers covering the Drum.
(46) Hook the Lever Arm.
(47) Reinstall the Drum Unit.
(48) Lock all the Drum Units by turning the Drum
Release Knob clockwise.
(49) Remove the sheet of paper.
152
DP-C405/C305/C265
FEB 2008