Color Exposure - Panasonic DP-C305 Service Manual

14. Press the "Reset" key twice on the Control Panel to exit to the initial screen of the F2 Service Mode.
15. Press the "Function", and the "C (Clear)" keys simultaneously on the Control Panel to exit the
Service Mode.
3.12.3. Color Exposure (Special Adjustment for Customer's Requirement)
1. Press the "Function", "Copy", and the "3" keys simultaneously on the Control Panel.
2. Input the password, and select the "OK" button to enter the Service Mode (default password is
00000000).
3. Press the "2" key on the Control Panel, and then press the "Start" key to enter the F2 Service Mode.
4. Select "Quality Adj." on the Touch Panel display, and set the Density to the center position.
Select "Full Color", "Text/Photo", "Commercial", and then select the "OK" button to set the
machine to Color T/ P Density.
5. Make a copy of Color Test Chart 101, or the Customer's Document, and verify the density.
6. Press the "Reset" key twice on the Control Panel to exit to the initial screen of the F2 Service Mode.
7. Press the "6" key on the Control Panel, and then press the "Start" key to enter the F6 Service Mode.
8. Enter F6-211 Color T/P Density(lt) Mode.
9. Select "Input" on the Touch Panel display.
10. Enter the new 2-digit value.
Note:
The "Reset" key is used to enter a "-" (Negative) value.
(+) : Lighter
(-) : Darker
11. Select the "OK" button on the Touch Panel display, and then select the "Close" button.
12. Press the "2" key on the Control Panel, and then press the "Start" key to enter the F2 Service Mode.
13. Make a copy to confirm the adjustment.
Note:
Repeat Step 4. to 13. until desired density is attained.
<Light Part Adjustment>
F6-210 : Color Text Density(lt)
F6-212 : Color Photo Density(lt)
<Dark Part Adjustment>
F6-215 : Color Text Density(dk)
F6-216 : Color T/P Density(dk)
F6-217 : Color Photo Density(dk)
14. Press the "Reset" key twice on the Control Panel to exit to the initial screen of the F2 Service Mode.
15. Press the "Function", and the "C (Clear)" keys simultaneously on the Control Panel to exit the
Service Mode.
Ver. 1.1
219
DP-C405/C305/C265
FEB 2008