Panasonic DP-C305 Service Manual page 669

Caution:
Do not remove the SD Memory Card or turn the power OFF during Formatting.
Note:
1. When a New (Blank) SD Memory Card is detected for the first time. The machine will format the SD
Card for DATA (used for G3 Fax / Internet Fax Image), and it takes approximately 3 to 12 min. to format
depending on the manufacturer, SD Memory Card Size or Data Access Speed of the SD Card.
2. If the SD Memory Card is formatted by the machine, clear all Jobs by following the steps below.
1) Press the "Function", "Copy", and the "3" keys simultaneously on the Control Panel.
2) Input the password, and select the "OK" button to enter the Service Mode (default password is
00000000).
3) Press the "9" key on the Control Panel, and then press the "Start" key to enter the F9 Service
Mode (Unit Maintenance).
4) Select "00 Fax Service Mode" on the Touch Panel display.
5) Scroll the menu with the "
6) Select "09 All Job Clear" on the Touch Panel display, and then select the "Yes" button.
After clearing the jobs, the machine reboots automatically and returns to the standby mode.
Ver. 1.1
Caution:
If the LED on the SC PC Board is lit (ON), the
Power to the machine is still ON.
Please read the entire section "9.5.2. Installation"
once again.
(3) Gently insert the SD Memory Card into the SD
Card Slot (CN9) on the SC PCB as illustrated
(Logo facing outward).
Caution:
Forcing the card into the slot may cause damage
to the card or machine.
(4) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(5) Plug the AC Power Cord, and turn the Main
Power Switch on the Back and the Power Switch
on the Left Side of the machine to the ON
position.
(6) Reconnect the Telephone Line / LAN Cable if
disconnected.
" button on the Touch Panel display, and select "06 RAM Initialize".
669
DP-C405/C305/C265
FEB 2008